Waterman Fuel,kse Power Steering &scp 1 Stage Dry Sump Pump,w/ Pulley,bert,brinn on 2040-parts.com

You are bidding on a Brand New Pump Assembly for Late Models and Modifieds.  This assembly includes a Stock Car Products Single Stage Dry Sump Pump, a KSE HPD Power Steering Pump, a Waterman LM300 Fuel Pump with Check Valve, and HTD Pulley & Belt.

This set includes the mounting flanges that connect the pumps.  This complete 3 Pump setup is sold under the Southwest Speed Part #412-1071.  It bolts directly to a Bert, Brinn, or Falcon Bellhousing, and you can then use the pulley and belt to drive the pumps off the Bert, Brinn, or Falcon HTD drive coupler.  This is great for use in numerous racing applications, including Late Model, Modified (IMCA, USMTS, UMP, etc), and any class that will allow this style of setup.

Includes:

• Stock Car Products Dry Sump Pump:
  • Stock Car Products Part #BT-100-A or Southwest Speed Part #412-103
  • Single stage oil pump
  • 1.45" Wide pump body
  • Includes -12 AN fittings
  • Features a 5/8" keyed shaft to hold the included pulley that runs the pumps off of a drive coupler
  • Pump spring can be changed to adjust the pressure if necessary
• Waterman Circle Track Fuel Pump with Check Valve:
  • Waterman Part #LM300
  • The WRC LM300 Fuel Pump is engineered to withstand the punishment of competitive circle track racing. This fuel pump is designed and machined from forged aluminum, and contains machined steel shafts and precision lapped gears. 
  • .300" Gear Set
  • Flows 2.8 gallons per minute
  • -10 AN Inlet
  • 8 AN Outlet
  • Includes a -6 AN Check Valve that is Preset at 22 lbs with a .140 Jet
  • Also includes a Phenolic heat spacer
  • This pump should be used with a dead-head style pressure regulator; you can see Waterman's plumbing diagram below, which shows the main way to use this pump; it can also be used by removing the check valve, installing a Bypass Regulator (instead of a dead-head Regulator), then returning the fuel to the fuel cell with a line direclty from that Bypass Regulator
  • Provides 25-35% more volume than standard pumps
  • Each pump is flow tested to ensure optimum performance and shipped "race ready"
• KSE High Power Density Power Steering Pump:
  • KSE Part #KSC1068-002
  • Features an HPD Double-ended 3/8" Hexshaft
  • Complete Features of the KSE HPD Power Steering Pump:
    • The most efficient, lightest-weight power steering pump in the smallest package
    • 25% Lighter Weight
      • Weighing in at 2.5 lbs including the mounting bracket, this is by far the lightest racing power steering pump made
    • 50% Smaller Package
      • Has a more compact design, but maintains same bolt pattern and mounting as all KSE power steering pumps
    • 20% More Efficient
      • The special design tear-drop timed porting and large #10 inlet eliminates cavitation up to 10,000 engine RPM
    • 3000 PSI pressure capability with non-sticking poppet-type relief valve set at 1400 PSI
      • This was made possible by the rigid construction design and zero tolerance clearances, as well as thermal expansion of only 0.0001 @ 200ºF
    • 100% Performance Tested
      • Every KSE pump is flow and pressure tested to strict specifications
    • Durable
      • Carburized 8620 shaft with ball bearing input and 3/8" hex drive male input and female output
  • You can view and download KSE's installation and start-up guide here
• Stock Car Products to KSE Mounting Bracket with Hex Drive Screw: 
  • Bracket: Stock Car Products Part #FP-5150-KSE or Southwest Speed Part #412-2132
  • Screw: Stock Car Products Part #38-24 or Southwest Speed Part #412-158
  • Attaches the KSE Power Steering Pump to the Stock Car Products Dry Sump Pump
• Waterman Mounting Flange:
  • Comes with the Waterman pump and attaches it to the KSE Power Steering Pump
• HTD Pulley with Belt Guides to run the Pumps off the Bert, Brinn, or Falcon Drive Coupler:
  • Southwest Speed Part #412-456
  • This kit has to be used in conjunction with a complete Bert, Brinn, or Falcon Bellhousing kit with an HTD Drive Coupler; this kit will work on any of those brands of Bellhousing kits (Chevy, Ford, Mopar), as long as the kit has the HTD Drive Coupler
  • 40 Tooth pulley
  • 1 1/4" wide
  • Hard anodized, 7075-T6 aluminum
  • Keyway accepts key on dry sump pump
  • Includes belt guides to keep the belt on the pulley
  • This kit doesn't include the Bert, Brinn, or Falcon drive coupler; those come with the Bert, Brinn, or Falcon Bellhousing kits, or we have them available separate in our Ebay store:
    • Bert Drive Coupler
    • Brinn Drive Coupler
    • Falcon Drive Coupler
• HTD Belt to go around the above HTD pulley and the Bert, Brinn, or Falcon Drive Coupler:
  • Southwest Speed Part #412-402
  • Non-slip, high performance belt
  • **If you have a Falcon Bellhousing, specify that, as we will then supply you with a #412-401 belt, which will be the 40mm shorter belt that the Falcon requires**

In our Ebay Store, we have:

• This Pump Assembly available without the Pulley and Belt
• This same assembly with a 4 Stage Dry Sump Pump
• This same assembly with a 3 Stage Dry Sump Pump
• The KSE Power Steering Pump sold by itself
• The Waterman Fuel Pump sold by itself
• We do have the Dry Sump Pumps available individually as well; just ask about those
• The Drive Couplers: Bert, Brinn, and Falcon

Completely Combined Pump Assembly:

Each Pump Shown Individually:

Waterman's Most Common Fuel System Diagram using this LM300 Pump:

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it's after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a "handling time" on each item and "1 Business Day" is the shortest listed option.  WE DON'T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

Shipping cost will be $19.99 within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.