Find or Sell any Parts for Your Vehicle in USA

Yanmar / Volvo Etc Overheating Warning Alarm, 2 X Bolt-on Sensors, Dash Display on 2040-parts.com

AU $139.00
Location:

Mission Beach, QLD, Australia

Mission Beach, QLD, Australia
Condition:New Brand:ENGINE GUARD Manufacturer Part Number:EG01/1

100% Australian made "Engine Guard" digital engine temperature alarm with DUAL bolt-on sensors. Brand New Model !

Freecall 1800 72 0018 for additional information (within Australia)

PLEASE NOTE: The connectors supplied in the kit may differ from the images featured on Ebay. We are changing to a new type and will soon update the images.

This system is supplied with 2 sensors enabling temperature measurement at 2 points on the same vessel- such as twin engines, or 2 points on the engine such as one showing coolant temperature, and one showing oil temperature. The on-dash digital display shows the temperature at these 2 sensors, and different alarm set-points can be set for each sensor.

Please Note: We will supply custom length sensor cable to suit longer vessels. Please advise the length you require after ordering via 'Buy it Now".

Compact display- fits flush on the dashboard or surrounds. Most other systems have large display units that cannot be fitted this way, and must be installed either on top or under dashboard. The "Engine Guard" uses the latest microprocessor technology making the display unit both more compact AND more accurate.

This system is entirely independent from the factory temperature gauge- you can actually see temperature changes in real time. The audible alarm can be set just above 'normal operating temperature', and can warn of overheating. Cheap insurance compared to expensive mechanical damage caused by overheating!

Installation is simple- no special tools or skills required. The Display Unit uses an advanced adhesive backing, so no drilling/screwing into the dashboard. The sensor is a simple bolt-on design that is quick to install and versatile. Please note the suggested location in the pictures above- the Sensor can be located in many other locations such as on the sump, on the gearbox/transmission, oil filter, etc. The audible warning buzzer is separate from the Display, so can be either hidden behind the dashboard, or the wires can be extended to relocate the buzzer closer to the driver/operator or in noisy environments.

Comprehensive Installation and Operating instructions supplied.

Display Dimensions: 78mm (w) x 40 (h) x 20mm (d)
Sensor Wire Length: 5m
Input Voltage          : 12v - 24v DC
Temperature Range: 0degC - 125degC


Customer Case Study: Bullet ski boat / Mercruiser V6

(Installed by Owner)

‘I have recently installed an Engine Guard digital temperature alarm on my 17ft Bullet ski boat. The boat is powered by a V6 Mercruiser engine and sterndrive. The engine uses raw sea water pumped through a heat exchange cooling system that then uses fresh water to then cool the engine. These systems are known to be unreliable when they get a few years old. Overheating is common, and engine rebuilds are expensive..

Normally the dashboard mounted temperature gauge will warn of potential overheating if you’re watching it, and that’s the problem. The boat is operated at speed - often in busy waters towing a skier or wake boarder. Watching the gauge is just not possible much of the time.

I fitted the ENGINE GUARD dual sensor alarm system. I’ve got one sensor on the heat exchanger so I can see exactly the temperature of the coolant going to the engine, and I’ve got the second sensor mounted via a stainless hose clamp around the oil filter so I can see oil temperature. Both have an alarm ‘set point’ that will warn me if there is a problem, which is the main point of the system. I can also see what difference load and speed makes to the engine- and it’s obvious that anything over about 4,500rpm is hard going for the ‘old school’ pushrod engine. Under that, the temperature stays nice and stable. That’s over 40 knots so it’s plenty fast enough for me.’

P.W

Palm Cove, Queensland.

Don’t delay – Engine Guard today!



Canadian Grand Prix (2013): RESULT

Sun, 09 Jun 2013

A Red Bull win for Sebastian Vettel in the Canadian Grand Prix Qualifying for the 2013 Canadian Grand Prix was a bit of a lottery, with spins and crashes and odd results thanks to rain. But despite the rain, we still ended up with a grid that looked about what you’d predict – apart from a Williams in third place – and the race ended up much the same – but without the Williams near the front. From the start Vettel powered away and, apart from three laps, led the Canadian Grand Pric from beginning to end to take his – and Red Bull’s – first win in North America – which will please Infiniti no end.

Suzuki plans to bring Kizashi to UK in 2011

Tue, 23 Nov 2010

Suzuki is evaluating bringing in its Mondeo-rivalling Kizashi family car to the UK market this time next year. The Suzuki Kizashi is already sold in Japan, the US, Australia and New Zealand, but now European importers are beginning to sell the car on the Continent. It's already sold in Switzerland and Norway, German sales begin in winter 2010 and - if the trial goes well - UK sales could kick off in autumn 2011.

MINI Roadster Concept revealed

Tue, 15 Sep 2009

MINI has revealed the MINI Roadster Concept at Frankfurt Just like the MINI Coupe. the MINI Roadster gets a chopped – but open in this case – top with a tilted back windscreen, although from the waist down the Roadster is pure MINI. But the Roadster is promising better handling with the roll over bar shifted forward to just beahind the front seats (there are no back seats) which should make the Roadster more rigid.